Toyota Yaris: If your engine stalls while driving
If your engine stalls while driving...
1. Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place.
2. Turn on your emergency flashers.
3. Turn the ignition key to “ACC” or “LOCK”, and try starting the engine again.
If the engine will not start, see “If your vehicle will not start” in this Section.
CAUTION.
If the engine is not running, the power assist for the brakes and steering will not work so steering and braking will be much harder than usual.
If your vehicle will not start
(a) Simple checks
Before making these checks, make sure you have followed the correct starting
procedure given in “How to start the engine” in Section 3 and that you have sufficient
fuel. I ...
If you cannot increase engine speed
If engine speed does not increase when the accelerator pedal is depressed, there
may be a problem somewhere in the electronic throttle control system.
At this time, vibration may occur. However, if ...
See also:
Body panel anti-rust agent (wax) application areas
HINT: 1) Apply anti-rust agent (wax) around the hinges whenever adjusting the
doors and hoods.
2) Even if partially repairing a part, apply anti-rust agent (wax) over the entire
application area ...
Brake pad wear limit indicators
The brake pad wear limit indicators on your disc brakes give a warning noise
when the brake pads are worn to where replacement is required.
If you hear a squealing or scraping noise while drivi ...
Body panel sealing areas
HINT: 1) Prior to applying body sealer, clean the area with a rag soaked in silicone
remover.
2) If weld-through primer was used, first wipe off any excess and than coat with
anti-corrosion prime ...