Toyota Yaris: Before starting the engine
1. Check the area around the vehicle before entering it.
2. Adjust seat position, seatback angle, head restraint height and steering wheel angle.
3. Adjust inside and outside rear view mirrors.
4. Lock all doors.
5. Fasten seat belts.
How to start the engine
—Cranking hold function
Once you turn the ignition key to “START” position and release it, the cranking
hold function continues to crank the engine in “ON” position until it starts.
Th ...
See also:
Back door opening trough (ASSY)
REPLACEMENT
With the quarter panel and body lower back panel removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the bod ...
Emergency flashers
To turn on the emergency flashers, push the switch.
All the turn signal lights will flash. To turn them off, push the switch once
again.
Turn on the emergency flashers to warn other drivers if ...
Checking the radiator and condenser
If any of the above parts are extremely dirty or you are not sure of their condition,
take your vehicle to a Toyota dealer.
CAUTION.
To prevent burning yourself, be careful not to touch the radiat ...
