Toyota Yaris: If the shift lever cannot be shifted from P (vehicles with an automatic transmission)
If the shift lever cannot be shifted with your foot on the brake pedal, there may be a problem with the shift lock system (a system to prevent accidental operation of the shift lever). Have the vehicle inspected by your Toyota dealer immediately. The following steps may be used as an emergency measure to ensure that the shift lever can be shifted:
Set the parking brake.
Turn the engine switch to the “ACC” position.
Depress the brake pedal.
Pry the cover up with a flathead screwdriver or equivalent tool.
To prevent damage to the cover, cover the tip of the screwdriver with a rag.
Press the shift lock override button.
The shift lever can be shifted while the button is pressed.
If the engine will not start
If the engine will not start even though correct starting procedures are being
followed (→P. 124), consider each of the following points:
■ The engine will not start even though the sta ...
If you lose your keys
New genuine Toyota keys can be made by your Toyota dealer using the other
key and the key number stamped on your key number plate. ...
See also:
Front door outer panel (CUT): Sedan U.S.A., Canada
REPLACEMENT
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension diagram. (See the body dimension diagram) Inspe ...
Body panel sealing areas
HINT: 1) Prior to applying body sealer, clean the area with a rag soaked in silicone
remover.
2) If weld-through primer was used, first wipe off any excess and than coat with
anti-corrosion prime ...
Cruise control
Use the cruise control to maintain a set speed without depressing the accelerator
pedal.
Indicators
Cruise control switch
■ Setting the vehicle speed
Press the “ON-OFF” button to ...