Toyota Yaris: Hood
To open the hood:
1. Pull the hood lock release lever. The hood will spring up slightly.
CAUTION.
Before driving, be sure that the hood is closed and securely locked. Otherwise, the hood may open unexpectedly while driving and an accident may occur.
2. In front of the vehicle, pull up the auxiliary catch lever and lift the hood.
3. Hold the hood open by inserting the support rod into the slot.
To insert the support rod into the slot, move it straight up. If it is moved to the side or toward the inside of the vehicle, it may become detached.
Before closing the hood, check to see that you have not forgotten any tools, rags, etc. and return the support rod to its clip- this prevents rattles. Then lower the hood and make sure it locks into place. If necessary, press down gently on the front edge to lock it.
CAUTION.
After inserting the support rod into the slot, make sure the rod supports the hood security from falling down on to your head or body.
NOTICE.
Be sure to return the support rod to its clip before closing the hood. Closing the hood with the support rod up could cause the hood to bend.
Back door
LOCKING AND UNLOCKING WITH KEY
Insert the key into the keyhole and turn it.
To lock: Turn the key clockwise.
To unlock: Turn the key counterclockwise.
To open the back door, push the button. ...
Theft deterrent system
(vehicles sold in Puerto Rico only)
To deter vehicle theft, the system is designed to sound an alarm if any of
the side doors, back door or hood is forcibly unlocked and opened.
The alarm blow ...
See also:
Head restraints
Head restraints are provided for all seats.
Up
Pull the head restraint up.
Down
Push the head restraint down while pushing the lock release button.
■Removing the head restraints
Front a ...
Cleaning and protecting the vehicle interior
The following procedures will help protect your vehicle’s interior and keep
it in top condition:
■ Protecting the vehicle interior
Remove dirt and dust using a vacuum cleaner. Wipe dirty s ...
Front door outer panel (CUT): Sedan U.S.A., Canada
REPLACEMENT
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension diagram. (See the body dimension diagram) Inspe ...