Toyota Yaris: Emergency flashers
To turn on the emergency flashers, push the switch.
All the turn signal lights will flash. To turn them off, push the switch once again.
Turn on the emergency flashers to warn other drivers if your vehicle must be stopped where it might be a traffic hazard.
Always pull as far off the road as possible.
The turn signal light switch will not work when the emergency flashers are operating.
NOTICE.
To prevent the battery from being discharged, do not leave the switch on longer than necessary when the engine is not running.
Headlights and turn signals
Except for Canada
For Canada
HEADLIGHTS
To turn on the following lights: Twist the headlight/turn signal lever knob.
Position 1—Parking, tail, license plate, side marker and instrume ...
Instrument panel light control
To adjust the brightness of the instrument panel lights, turn the dial.
With the dial turned fully up, the intensity of the instrument panel lights will
not be reduced even when the tail lights ...
See also:
Proper and efficient work procedures
1. REMOVAL
(a) PRE-REMOVAL MEASURING.
(1) Before removal or cutting operations, take measurements in accordance with
the dimensions diagram. Always use a puller to straighten a damaged body or f ...
Aluminum wheel precautions
When installing aluminum wheels, check that the wheel nuts are tight after driving
your vehicle the first 1600 km (1000 miles).
If you have rotated, repaired, or changed your tires, check that the ...
If a warning light turns on or a warning buzzer sounds...
Calmly perform the following actions if any of the warning lights comes on
or flashes. If a light comes on or flashes, but then goes off, this does not necessarily
indicate a malfunction in the sy ...