Toyota Yaris: Parking brake

Type A

Type B
When parking, firmly apply the parking brake to avoid inadvertent creeping.
To set: Pull up the lever. For better holding power, first depress the brake pedal and hold it while setting the parking brake.
To release: Pull up the lever slightly (1), press the thumb button (2), and lower (3).
To remind you that the parking brake is set, the parking brake reminder light in the instrument panel remains on until you release the parking brake.
CAUTION.
Before driving, be sure the parking brake is fully released and the parking brake reminder light is off.
Manual transmission
The shift pattern is conventional as shown above.
Press the clutch pedal down fully while shifting, and then release it slowly.
Do not rest your foot on the pedal while driving, because it will ...
Audio system
...
See also:
Adhesive Application Area Work Procedure
NOTE.
This vehicle has areas on the Quarter Panel and Quarter Wheel Housing Outer Panel
that are joined together only with adhesive. It is necessary to conduct the correct
repair procedures for h ...
Rear floor crossmember NO.2 (ASSY)
REPLACEMENT
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension diagram. (See the body dimension diagram) Inspe ...
Front fender mounting bracket (ASSY)
REPLACEMENT
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension diagram. (See the body dimension diagram) Inspe ...