Toyota Yaris: Windshield wipers and washer
To turn on the windshield wipers, move the lever to the desired setting.
The key must be in the “ON” position.
| Lever position | Speed setting |
| Position 1 | Intermittent |
| Position 2 | Slow |
| Position 3 | Fast |
For a single sweep of the windshield, push the lever up and release it.
To squirt washer fluid, pull the lever toward you.
If the windshield wipers are off, they will operate a couple of times after the washer squirts.
For instructions on adding washer fluid, see “Adding washer fluid”.
In freezing weather, warm the windshield with the defroster before using the washer.
This will help prevent the washer fluid from freezing on your windshield, which can block your vision.
NOTICE.
Do not operate the wipers if the windshield is dry. It may scratch the glass.
When waxing your vehicle, make sure that the washer nozzles do not become blocked. If a nozzle becomes blocked, contact your Toyota dealer to have the vehicle serviced.
NOTICE.
If a nozzle becomes blocked, do not try to clear it with a pin or other object. The nozzle will be damaged.
Personal lights
To turn on the personal light, push the lens. To turn the light off, push
the lens once again.
...
Rear window wiper and washer
To turn on the rear window wiper, twist the lever knob upward. (Position 1)
The key must be in the “ON” position.
To squirt washer fluid on the rear window, twist the knob upward or downward ...
See also:
Silencer sheet installation areas
...
Checking and replacing fuses
Type A
Type B
Type C
If the headlights or other electrical components do not work, check the fuses.
If any of the fuses are blown, they must be replaced.
See “Fuse locations” ...
Body panel sealing areas
HINT: 1) Prior to applying body sealer, clean the area with a rag soaked in silicone
remover.
2) If weld-through primer was used, first wipe off any excess and than coat with
anti-corrosion prime ...