Toyota Yaris: Views of this text - Toyota Yaris XP90 2005–2010 Collision Repair ManualToyota Yaris: Views of this text

Scope of the repair work explanation

This text explains the welding panel replacement instructions from the vehicle’s white body condition.

We have abbreviated the explanations of the removal and reinstallation of the equipment parts up to the white body condition and of the installation, inspection, adjustment and final inspection of equipment parts after replacing the weld panel.

Section categories

This manual has been divided as shown below.

Section Title Contents Examples
INTRODUCTION Explanation of general body repair.

Views of weld panel replacement instructions.

 Cautionary items.

Views of weld panel replacement instructions.
BODY PANEL REPLACEMENT Instructions for replacing the weld panels from the white body condition, from which bolted parts have been removed, with individual supply parts. Front side member replacement.

Quarter panel replacement.
BODY DIMENSIONS Body aligning measurements. Dimension diagrams.
PAINT COATING Scope and type of anti-rust treatment, etc.

together with weld panel replacement.

 Under coating.

Body sealer.

Contents omitted in this manual.

Make sure to perform the following essential procedures, although they are omitted in this manual.

(1) Jack and lift operations.

(2) Clean and wash removed parts, if necessary.

(3) Visual inspection.

    Foreword
    This repair manual has been prepared to provide essential information on body panel repair methods (including cutting and welding operations, but excluding painting) for the TOYOTA YARIS. Applica ...

    Introduction
    ...

    See also:

    Front seats
    —Front seat precautions Driver seat CAUTION. The SRS driver airbag deploys with considerable force, and can cause death or serious injury especially if the driver is very close to the airba ...

    Body panel anti-rust agent (wax) application areas
    HINT: 1) Apply anti-rust agent (wax) around the hinges whenever adjusting the doors and hoods. 2) Even if partially repairing a part, apply anti-rust agent (wax) over the entire application area ...

    If a warning light turns on or a warning buzzer sounds...
    Calmly perform the following actions if any of the warning lights comes on or flashes. If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the sy ...