Toyota Yaris: Types of tires - Information before driving your Toyota - Toyota Yaris XP90 2005–2010 Owner's ManualToyota Yaris: Types of tires

Determine what kind of tires your vehicle is originally equipped with.

1. Summer tires

Summer tires are high-speed capability tires best suited to highway driving under dry conditions.

Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow-covered or icy roads.

For driving on snow-covered or icy roads, we recommend using snow tires. If installing snow tires, be sure to replace all four tires.

2. All season tires

All season tires are designed to provide better traction in snow and to be adequate for driving in most winter conditions, as well as for use all year round.

All season tires, however, do not have adequate traction performance compared with snow tires in heavy or loose snow. Also, all season tires fall short in acceleration and handling performance compared with summer tires in highway driving.

The details about how to distinguish summer tires from all season tires are described.

CAUTION.

Do not mix summer and all season tires on your vehicle as this can cause dangerous handling characteristics, resulting in loss of control.

Do not use tires other than the manufacturer’s designated tires, and do not mix tires or wheels of the sizes different from the originally equipped tires and wheels as this can cause dangerous handling characteristics, resulting in loss of control.

    Cargo and luggage
    —Stowage precautions When stowing cargo and luggage in the vehicle, observe the following: - Put cargo and luggage in the luggage compartment when at all possible. Be sure all items are secure ...

    Starting and driving
    ...

    See also:

    Front sidemember reinforcement (ASSY)
    REPLACEMENT With the radiator support and front fender apron removed. REMOVAL INSTALLATION Temporarily install the new parts and measure each part of the new parts in accordance with the bod ...

    General information
    1. BASIC DIMENSIONS (a) There are two types of dimensions in the diagram. (1) (Three-dimensional distance). Straight-line distance between the centers of two measuring points. (2) (Two-dimensi ...

    How to start the engine
    —Cranking hold function Once you turn the ignition key to “START” position and release it, the cranking hold function continues to crank the engine in “ON” position until it starts. Th ...