Toyota Yaris: Roof panel (ASSY)
REPLACEMENT
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram) Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
After welding, apply polyurethane foam to the corresponding parts.
After welding, apply body sealer and undercoating to the corresponding parts.
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
Rear floor sidemember (CUT)
REPLACEMENT
With the body lower back panel removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension diagra ...
See also:
Foreword
This repair manual has been prepared to provide essential information on body
panel repair methods (including cutting and welding operations, but excluding painting)
for the TOYOTA YARIS.
Applica ...
Brake pad wear limit indicators
The brake pad wear limit indicators on your disc brakes give a warning noise
when the brake pads are worn to where replacement is required.
If you hear a squealing or scraping noise while drivi ...
Three-way catalytic converter
The three-way catalytic converter is an emission control device installed
in the exhaust system.
The purpose is to reduce pollutants in the exhaust gas.
CAUTION.
Keep people and combustible m ...