Toyota Yaris: Outside rear view mirrors
Mirror angle can be adjusted.
Vehicles with a manually adjustable type

Adjust the mirror up, down, in or out by pushing the mirror surface.
Vehicles with a power-adjustable type

To select a mirror to adjust, press the switch.
Left
Right

To adjust the mirror, press the switch.
Up
Right
Down
Left
Folding the mirrors

Push the mirror back in the direction of the vehicle’s rear.
■Mirror angle can be adjusted when (vehicles with a power-adjustable type)
The engine switch is in the “ACC” or “ON” position.
■When the mirrors are fogged up (vehicles with an outside rear view mirror defoggers)
Turn on the mirror defoggers to defog the mirrors. (→P. 199)
CAUTION
■When driving the vehicle
Observe the following precautions while driving. Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury.
●Do not adjust the mirrors while driving.
●Do not drive with the mirrors folded.
●Both the driver and passenger side mirrors must be extended and properly adjusted before driving.
■When a mirror is moving (vehicles with a power-adjustable type)
To avoid personal injury and mirror malfunction, be careful not to get your hand caught by the moving mirror.
■When the mirror defoggers are operating (vehicles with an outside rear view mirror defoggers)
Do not touch the rear view mirror surfaces, as they can become very hot and burn you.
Anti-glare inside rear view mirror
Glare from the headlights of vehicles behind can be reduced by using the following functions:
Normal position
Anti-glare position
Adjusting the height of rear view mirror
Adjust the height ...
Opening and closing the windows
Power windows
The power windows can be opened and closed using the switches.
Operating the switch moves the windows as follows:
Closing
Opening
One-touch opening (driver’s window only) ...
See also:
Fit standards
...
Refueling
Opening the fuel tank cap
Perform the following steps to open the fuel tank cap:
■ Before refueling the vehicle
Turn the engine switch off and ensure that all the doors and windows are closed ...
How to use this manual
1. BODY PANEL REPLACEMENT IN THIS MANUAL
2. SYMBOLS
The following symbols are used in the welding diagrams in section BP of this
manual to indicate cutting areas and the types of weld required ...