Toyota Yaris: Luggage door opening front trough (ASSY): Sedan
REPLACEMENT
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram) Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
After welding, apply polyurethane foam to the corresponding parts.
After welding, apply body sealer and undercoating to the corresponding parts.
After applying the top, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
Back door opening trough (ASSY): Hatchback
REPLACEMENT
With the quarter panel and body lower back panel removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the bod ...
See also:
Air conditioning filter
(on some models)—
The air conditioning filter information label is placed inside of the glove
box as shown and indicates that a filter has been installed.
The air conditioning filter preve ...
Fuel pump shut off system
To minimize the risk of fuel leakage when the engine stalls or when an airbag
inflates upon collision, the fuel pump shut off system stops the supply of fuel
to the engine.
Follow the procedure b ...
Engine compartment overview
1. Windshield washer and rear window washer fluid tank.
2. Engine oil filler cap.
3. Fusible link block.
4. Brake fluid reservoir.
5. Fuse block.
6. Battery.
7. Radiator.
8. Condenser.
9. El ...