Toyota Yaris: Luggage compartment features - Other interior features - Interior features - Toyota Yaris XP130 2010–2026 Owner's ManualToyota Yaris: Luggage compartment features

■ Deck board

Removing the deck board

Removing the deck board

Lift up the deck board and pull it towards you to remove it.

Lift up the deck board and pull it towards you to remove it.

Securing the deck board

Lift up the deck board.

Lift up the deck board.

Remove the hook on the backside

of the deck board. Remove the hook on the backside of the deck board.

of the back door opening as shown. Attach the hook to the upper edge of the back door opening as shown.

■Removing the luggage cover

The luggage cover can be removed by the following procedure:

Unhook the cords.

Return the luggage cover to horizontal Unhook the cords.

position. Return the luggage cover to horizontal position.

Lift the luggage cover and pull it forward.

Lift the luggage cover and pull it forward.

CAUTION

■When operating the deck board

Do not place anything on the deck board when operating the board. Otherwise, your fingers may be caught or an accident may result causing injuries.

    Floor mat
    Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the fl ...

    Maintenance and care
    Cleaning and protecting your vehicle, performing do-ityourself maintenance, and maintenance information. ...

    See also:

    Rear floor crossmember NO.2 (ASSY)
    REPLACEMENT REMOVAL INSTALLATION Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram) Inspe ...

    Horn
    To sound the horn, press on or close to the mark. ■After adjusting the steering wheel Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel i ...

    Front door outer panel (CUT): 3-Door
    REPLACEMENT REMOVAL INSTALLATION Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram) Inspe ...