Toyota Yaris: Head restraints
Head restraints are provided for all seats.
Up
Pull the head restraint up.
Down
Push the head restraint down while pushing the lock release button.
■Removing the head restraints
Front and rear center head restraints
Pull the head restraint up while pressing the lock release button.
Rear outside head restraints
Pull the lock release knob and fold down the seatback until it reaches the position where the head restraints can be removed.
Pull the head restraint up while pressing the lock release button.
■Installing the head restraints
Front and rear center head restraints
Align the head restraint with installation holes and push it down to the lock position.
Press and hold the lock release button Lock when lowering the head restraint.
Rear outside head restraints
Pull the lock release knob and fold down the seatback until it reaches the position where the head restraints can be installed.
Align the head restraint with installation holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
■Adjusting the height of the head restraints
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
■Adjusting the rear center seat head restraint
Always raise the head restraint one level from the stowed position when using.
CAUTION
■Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
●Use the head restraints designed for each respective seat.
●Adjust the head restraints to the correct position at all times.
●After adjusting the head restraints, push down on them and make sure they are locked in position.
●Do not drive with the head restraints removed.
Rear seats
The seatbacks of the rear seats can be folded down.
Stow the rear seat belt buckles as shown.
Stow the seat belts.
Center
→P. 55
Outside
Use the seat belt hangers to prevent the belts ...
Seat belts
Make sure that all occupants are wearing their seat belts before driving the vehicle.
■ Correct use of the seat belts
● Extend the shoulder belt so that it comes fully over the should ...
See also:
If the shift lever cannot be shifted from P (vehicles with an automatic transmission)
If the shift lever cannot be shifted with your foot on the brake pedal, there
may be a problem with the shift lock system (a system to prevent accidental operation
of the shift lever). Have the ve ...
Installing child restraints
Follow the child restraint system manufacturer’s instructions. Firmly secure
child restraints to the rear seats using the LATCH anchors or a seat belt. Attach
the top tether strap when installin ...
If your vehicle overheats
If your engine coolant temperature gauge indicates overheating, if you experience
a loss of power, or if you hear a loud knocking or pinging noise, the engine has
probably overheated. You should f ...