Toyota Yaris: Fuel pump shut off system
To minimize the risk of fuel leakage when the engine stalls or when an airbag inflates upon collision, the fuel pump shut off system stops the supply of fuel to the engine.
Follow the procedure below to restart the engine after the system is activated.
Turn the engine switch to the “ACC” or “LOCK” position.
Restart the engine.
NOTICE
■Before starting the engine
Inspect the ground under the vehicle. If you find that fuel has leaked onto the ground, the fuel system has been damaged and is in need of repair. Do not restart the engine.
If you think something is wrong
If you notice any of the following symptoms, your vehicle probably needs adjustment
or repair. Contact your Toyota dealer as soon as possible.
■ Visible symptoms
● Fluid leaks under th ...
See also:
Foamed material application areas
The sections shown in the figure below are filled with foamed material to provide
noise insulation.
Refill with foamed materials after repairing these sections and their surrounding
sections.
HI ...
Body panel anti-chipping paint application areas
HINT: 1) Anti-chipping paint should be applied to some areas before the second
coat and to other areas after the top coat.
2) Wipe off the paint immediately with a rag soaked in silicone remover if ...
Adhesive Application Area Work Procedure
NOTE.
This vehicle has areas on the Quarter Panel and Quarter Wheel Housing Outer Panel
that are joined together only with adhesive. It is necessary to conduct the correct
repair procedures for h ...