Engine

Model: 1.5 L 4-cylinder (1NZ-FE). Type: 4 cylinder in line, 4 cycle, gasoline. Bore and stroke, mm (in.): 75.0 84.7 (2.95 3.33). Displacement, cm3 (cu. in.): 1496 (91.3). ...

Service specifications

ENGINE Valve clearance (engine cold), mm (in.): Intake 0.15—0.25 (0.006—0.010). Exhaust 0.25—0.35 (0.010—0.014). Spark plug type: DENSO SK16R11. NGK IFR5A11. Spark plug gap, mm(in.): ...

See also:

Rear floor crossmember NO.2 (ASSY)
REPLACEMENT REMOVAL INSTALLATION Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram) Inspe ...

Rear window defogger
To defog or defrost the rear window, push the switch. The key must be in the “ON” position. The thin heater wires on the inside of the rear window will quickly clear the surface. An indic ...

Body panel sealing areas
HINT: 1) Prior to applying body sealer, clean the area with a rag soaked in silicone remover. 2) If weld-through primer was used, first wipe off any excess and than coat with anti-corrosion prime ...