Toyota Yaris: Front fender apron (ASSY)
REPLACEMENT
With the cowl top side panel removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram) Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
After welding, apply the polyurethane foam to the corresponding parts.
After welding, apply body sealer and under-coating to the corresponding parts.
After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.
Front fender mounting bracket (ASSY)
REPLACEMENT
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension diagram. (See the body dimension diagram) Inspe ...
Front sidemember reinforcement (ASSY)
REPLACEMENT
With the radiator support and front fender apron removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the bod ...
See also:
Foreword
This repair manual has been prepared to provide essential information on body
panel repair methods (including cutting and welding operations, but excluding painting)
for the TOYOTA YARIS.
Applica ...
Floor mat
Use only floor mats designed specifically for vehicles of the same model and
model year as your vehicle. Fix them securely in place onto the carpet.
Insert the retaining hooks (clips) into the fl ...
Rear window wiper and washer
To turn on the rear window wiper, twist the lever knob upward. (Position 1)
The key must be in the “ON” position.
To squirt washer fluid on the rear window, twist the knob upward or downward ...