Toyota Yaris: Front body pillar (CUT): Sedan
REPLACEMENT
With the cowl top side upper panel removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram) Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
After welding, apply polyurethane foam to the corresponding parts.
After welding, apply body sealer and undercoating to the corresponding parts.
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.
Front body pillar (CUT): Hatchback
REPLACEMENT
With the cowl top side upper panel removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension ...
Front door outer panel (CUT): Hatchback 5 Door
REPLACEMENT
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension diagram. (See the body dimension diagram) Inspe ...
See also:
Front seats
—Front seat precautions
Driver seat
CAUTION.
The SRS driver airbag deploys with considerable force, and can cause death or
serious injury especially if the driver is very close to the airba ...
Rear floor pan (ASSY)
REPLACEMENT
With the body lower back panel and floor side rail front panel removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordanc ...
Keys (without engine immobilizer system)
With wireless remote control
Without wireless remote control
These keys work in every lock.
Since the side doors and back door can be locked without a key, you should always
carry a spa ...