Toyota Yaris: Floor side rail front panel (ASSY): Hatchback
REPLACEMENT
With the body lower back panel removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram) Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
After welding, apply the polyurethane foam to the corresponding parts.
After welding, apply body sealer and under-coating to the corresponding parts.
After applying the top coat layer, apply anti-rust agent to the inside of the necked section structural weld spots.
Quarter panel upper extension (CUT): Hatchback
REPLACEMENT
With the back door opening trough removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension dia ...
Floor side rail front panel (ASSY): Sedan
REPLACEMENT
With the body lower back panel removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension diagra ...
See also:
Cruise control
Use the cruise control to maintain a set speed without depressing the accelerator
pedal.
Indicators
Cruise control switch
■ Setting the vehicle speed
Press the “ON-OFF” button to ...
Power outlet
The power outlet is designed for power supply for car accessories. To use
the power outlet, open as shown in the illustration.
The key must be in the “ACC” or “ON” position for the powe ...
Rear window defogger
To defog or defrost the rear window, push the switch.
The key must be in the “ON” position.
The thin heater wires on the inside of the rear window will quickly clear the
surface.
An indic ...