Toyota Yaris: Aluminum wheel precautions
When installing aluminum wheels, check that the wheel nuts are tight after driving your vehicle the first 1600 km (1000 miles).
If you have rotated, repaired, or changed your tires, check that the wheel nuts are still tight after driving 1600 km (1000 miles).
When using tire chains, be careful not to damage the aluminum wheels.
Use only Toyota wheel nuts and wrench designed for your aluminum wheels.
When balancing your wheels, use only Toyota balance weights or equivalent and a plastic or rubber hammer.
As with any wheel, periodically check your aluminum wheels for damage. If damaged, replace immediately.
Replacing wheels
WHEN TO REPLACE YOUR WHEELS
If you have wheel damage such as bending, cracks or heavy corrosion, the wheel
should be replaced.
If you fail to replace a damaged wheel, the tire may slip off the ...
See also:
Body panel sealing areas
HINT: 1) Prior to applying body sealer, clean the area with a rag soaked in silicone
remover.
2) If weld-through primer was used, first wipe off any excess and than coat with
anti-corrosion prime ...
Quarter panel upper extension (CUT)
REPLACEMENT
With the back door opening trough removed.
REMOVAL
INSTALLATION
Temporarily install the new parts and measure each part of the new parts in accordance
with the body dimension dia ...
Proper and efficient work procedures
1. REMOVAL
(a) PRE-REMOVAL MEASURING.
(1) Before removal or cutting operations, take measurements in accordance with
the dimensions diagram. Always use a puller to straighten a damaged body or f ...