Toyota Yaris: Does your vehicle need repairing? - Vehicle maintenance and care - Toyota Yaris XP90 2005–2010 Owner's ManualToyota Yaris: Does your vehicle need repairing?

Be on the alert for changes in performance, sounds, and visual tip-offs that indicate service is needed. Some important clues are as follows:

Engine missing, stumbling, or pinging Appreciable loss of power Strange engine noises A leak under the vehicle (however, water dripping from the air conditioning after use is normal.) Change in exhaust sound (This may indicate a dangerous carbon monoxide leak. Drive with the windows open and have the exhaust system checked immediately.) Flat-looking tire; excessive tire squeal when cornering; uneven tire wear Vehicle pulls to one side when driving straight on a level road Strange noises related to suspension movement Loss of brake effectiveness; spongy feeling brake or clutch pedal; pedal almost touches floor; vehicle pulls to one side when braking Engine coolant temperature continually higher than normal

If you notice any of these clues, take your vehicle to your Toyota dealer as soon as possible. It probably needs adjustment or repair.

CAUTION.

Do not continue driving with the vehicle unchecked. It could result in serious vehicle damage and possibly personal injury.

    General maintenance
    Listed below are the general maintenance items that should be performed as frequently as specified. In addition to checking the items listed, if you notice any unusual noise, smell or vibration, y ...

    Emissions Inspection and Maintenance (I/M) programs
    Some states have vehicle emission inspection programs which include OBD (On-Board Diagnostics) checks. The OBD system monitors the operation of the emission control system. When the OBD system de ...

    See also:

    Suspension and chassis
    CAUTION. Do not modify the suspension/chassis with lift kits, spacers, springs, etc. It can cause dangerous vehicle handling characteristics, resulting in loss of control. ...

    Front sidemember reinforcement (CUT-P)
    REPLACEMENT With the radiator support removed. REMOVAL INSTALLATION Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. ...

    Proper and efficient work procedures
    1. REMOVAL (a) PRE-REMOVAL MEASURING. (1) Before removal or cutting operations, take measurements in accordance with the dimensions diagram. Always use a puller to straighten a damaged body or f ...